ASUS ROG GA401QH-HZ017 RAM upgrade specifications
The ASUS ROG Zephyrus G14 GA401QH-HZ017 features DDR4-SDRAM memory specifications with one SO-DIMM slot available for upgrade. The laptop supports maximum RAM capacity of 32 GB through compatible upgrades at 3200 MHz frequency. The memory configuration consists of on-board soldered memory combined with one replaceable SO-DIMM slot, allowing users to expand total system memory up to the specified maximum capacity. This upgrade specifications enable flexibility in memory enhancement for the Zephyrus G14 series.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 1x SO-DIMM |
| Form factor | On-board + SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 19 August 2021 |
Additional Notes
- The presence of on-board memory means the total system capacity is determined by a fixed module and a single expansion slot, preventing a symmetrical dual-channel configuration if the capacities do not match.
- The maximum capacity limit indicates the motherboard firmware supports a 24 GB module in the single slot alongside an 8 GB soldered base or a 16 GB module alongside a 16 GB base.
- Memory upgrades for the ASUS ROG GA401QH-HZ017 require modules with JEDEC profiles to achieve the 3200 MHz frequency because the system lacks support for XMP or manual voltage adjustments.
- Integrating a module with a higher frequency than the rated 3200 MHz results in an automatic downclock to match the hardware-coded ceiling of the processor and on-board memory.
- Physical installation is restricted to a single SO-DIMM component, which limits future scalability once the maximum supported module is installed.
- Latency performance depends on the primary timing of the permanent on-board memory because the system defaults to the slowest common denominator between the two hardware sets.
- Internal access for maintenance requires tools for the base panel but does not void the standard manufacturer warranty provided the internal components remain undamaged during the process.