ASUS TUF Gaming FA506IH-BQ027T RAM upgrade specifications
ASUS TUF Gaming A15 FA506IH-BQ027T features DDR4-SDRAM memory upgrade specifications. The laptop contains 2x SO-DIMM slots compatible with DDR4 memory modules operating at 3200 MHz frequency. Maximum RAM capacity supported reaches 32 GB total. SO-DIMM form factor memory modules are required for upgrades. The specifications indicate upgrade slots available for expanding system memory beyond factory configuration. Compatible DDR4-SDRAM modules deliver performance within manufacturer-defined parameters for this gaming laptop model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 04 March 2020 |
Additional Notes
- Dual channel memory architecture requires installing modules in pairs to utilize the full bus width and maximize integrated graphics performance.
- The absence of soldered memory on the ASUS TUF Gaming FA506IH-BQ027T allows for the replacement of both factory sticks to achieve synchronous timing profiles.
- Upgrading beyond 32 GB is restricted by the BIOS firmware despite the physical ability of the chipset to address higher densities.
- Latency disparities occur if modules with different CAS timings are mixed because the system defaults to the slowest common denominator.
- Installing high performance 3200 MHz modules with XMP profiles results in downclocking because the motherboard typically relies on standard JEDEC voltage specifications.
- Physical access to the SO-DIMM slots necessitates the removal of the entire bottom chassis panel which involve plastic clips prone to snapping without proper prying tools.
- Voltage compatibility is limited to 1.2V DDR4 standards and using high voltage overclocking kits causes system instability or failure to POST.