ASUS Vivobook S512FA-EJ662T RAM upgrade specifications

ASUS S512FA-EJ662T ASUS S512FA-EJ662T ASUS S512FA-EJ662T ASUS S512FA-EJ662T ASUS S512FA-EJ662T

The ASUS Vivobook 15 Series S512FA-EJ662T features DDR4-SDRAM memory upgrade specifications with one SO-DIMM slot available for expansion. The laptop contains on-board memory combined with a single SO-DIMM slot, supporting a maximum RAM capacity of 12 GB. Memory specifications indicate DDR4-SDRAM operating at 2400 MHz frequency. Compatible RAM upgrades must match DDR4-SDRAM specifications to ensure proper functionality with the S512FA-EJ662T model. The upgrade capacity is limited by the single memory slot configuration, with maximum compatible capacity reaching 12 GB for this ASUS Vivobook Series laptop.

Memory Upgrade Specifications

SpecificationValue
Memory slots1x SO-DIMM
Form factorOn-board + SO-DIMM
Memory typeDDR4-SDRAM
Frequency2400 MHz
Maximum RAM12 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2400 (PC4-19200)
Bandwidth19.2 GB/s
Laptop Release date25 December 2019

Additional Notes

  • The presence of on board memory indicates that half of the system RAM is permanently soldered to the motherboard and cannot be replaced or repaired.
  • Total memory expansion is limited to a single physical module which restricts the ability to run 2 channel memory configurations across the entire capacity once the base limit is exceeded.
  • Installation of high speed modules will result in a downclocking effect to match the native controller frequency of the ASUS Vivobook S512FA-EJ662T hardware.
  • Upgrading the single SO-DIMM slot requires matching the voltage of the integrated chips to prevent stability issues or POST failures.
  • The 12 GB ceiling implies a 4 GB soldered base and an 8 GB maximum capacity for the expansion slot.
  • Internal access for hardware modification requires the removal of the entire base panel which carries the risk of damaging plastic retention clips or voiding regional warranty seals.
  • Memory latency is predefined by the soldered component and any higher grade aftermarket module will default to the slowest common denominator for timing synchronization.