ASUS Vivobook X512DA-EJ532T-BE RAM upgrade specifications
The ASUS Vivobook 15 X512DA-EJ532T-BE features DDR4-SDRAM memory upgrade specifications. The laptop contains one SO-DIMM slot available for RAM expansion. Maximum compatible memory capacity reaches 12 GB total, combining on-board memory with the upgradeable SO-DIMM slot. Memory operates at 2400 MHz frequency. Users can upgrade the single memory slot to achieve maximum RAM specifications for enhanced system performance and multitasking capabilities.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 1x SO-DIMM |
| Form factor | On-board + SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2400 MHz |
| Maximum RAM | 12 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2400 (PC4-19200) |
| Bandwidth | 19.2 GB/s |
| Laptop Release date | 01 August 2019 |
Additional Notes
- The presence of on board memory indicates that a portion of the system RAM is permanently soldered to the motherboard and cannot be replaced or upgraded.
- System memory expansion relies on a single available expansion slot which limits the device to single channel or asymmetric dual channel configurations depending on the capacity of the installed module.
- The memory architecture of the ASUS Vivobook X512DA-EJ532T-BE dictates a maximum module limit of 8 GB in the expansion slot to reach the total supported ceiling of 12 GB.
- Installing a memory module with a higher frequency than 2400 MHz results in automatic downclocking to match the hardcoded motherboard bus speed.
- Dual channel performance benefits only apply to the capacity where the soldered chip and the removable module match in size while any remaining capacity on the larger module operates in single channel mode.
- The hardware design restricts future proofing since the failure of the soldered memory chips necessitates a full motherboard replacement rather than a simple component swap.
- Upgrading the SO DIMM module requires the removal of the entire base panel which involves navigating internal plastic clips and potentially fragile ribbon cables.