ASUS Vivobook X512FA-EJ121T RAM upgrade specifications

ASUS X512FA-EJ121T ASUS X512FA-EJ121T ASUS X512FA-EJ121T ASUS X512FA-EJ121T ASUS X512FA-EJ121T

ASUS Vivobook 15 series X512FA-EJ121T laptop features DDR4-SDRAM memory configuration with 1x SO-DIMM slot available for upgrade. Maximum RAM capacity reaches 16 GB with 2400 MHz frequency specifications. Memory upgrade compatible with existing on-board configuration. SO-DIMM form factor slots support compatible DDR4 modules for expanding total system memory capacity.

Memory Upgrade Specifications

SpecificationValue
Memory slots1x SO-DIMM
Form factorOn-board + SO-DIMM
Memory typeDDR4-SDRAM
Frequency2400 MHz
Maximum RAM16 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2400 (PC4-19200)
Bandwidth19.2 GB/s
Laptop Release date03 December 2018

Additional Notes

  • The ASUS Vivobook X512FA-EJ121T combines soldered RAM with a single accessible slot, limiting total capacity to 16 GB regardless of the installed module size due to system architecture constraints.
  • The soldered memory component cannot be removed or replaced, making only the SO-DIMM slot available for warranty-safe modifications without motherboard-level intervention.
  • Installing a module faster than 2400 MHz will result in automatic downclocking to match the system's supported frequency, eliminating any potential performance gains from higher-rated memory.
  • The single-slot configuration prevents dual-channel memory operation unless the soldered RAM is already present, which would enable asymmetric dual-channel mode when paired with a compatible SO-DIMM module.
  • DDR4-2400 operates with increased latency compared to newer DDR4-3200 standards, potentially creating minor bottlenecks in memory-intensive applications despite matching the official specification.
  • Physical access requires removing the bottom panel and potentially voiding seals, though SO-DIMM replacement typically remains within consumer-serviceable boundaries under most warranty terms.
  • Mixing memory modules with different densities or timings may force the system to operate at the lowest common specification, reducing overall performance stability.
  • The 260-pin SO-DIMM standard requires precise insertion angle and locking mechanism engagement to ensure proper electrical contact and system recognition during POST.