ASUS Vivobook X512FA-EJ805T RAM upgrade specifications

ASUS X512FA-EJ805T ASUS X512FA-EJ805T ASUS X512FA-EJ805T ASUS X512FA-EJ805T ASUS X512FA-EJ805T

The ASUS Vivobook 15 Series X512FA-EJ805T supports DDR4-SDRAM memory upgrades with a maximum RAM capacity of 12 GB. The laptop features 1x SO-DIMM slot for memory expansion, compatible with DDR4-2400 MHz specifications. The upgrade configuration combines on-board memory with removable SO-DIMM modules, enabling users to expand the total system memory to the specified maximum capacity through compatible RAM modules.

Memory Upgrade Specifications

SpecificationValue
Memory slots1x SO-DIMM
Form factorOn-board + SO-DIMM
Memory typeDDR4-SDRAM
Frequency2400 MHz
Maximum RAM12 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2400 (PC4-19200)
Bandwidth19.2 GB/s
Laptop Release date01 August 2019

Additional Notes

  • The ASUS Vivobook X512FA-EJ805T contains soldered on-board memory paired with 1 single SO-DIMM slot, meaning maximum addressable RAM is constrained by the soldered component rather than socket capacity alone.
  • Upgrading to the 12 GB ceiling requires installing a 4 GB SO-DIMM module, since the on-board portion is fixed and non-removable. Replacing the existing module with an 8 GB stick does not yield 16 GB total capacity due to the 12 GB firmware or hardware limit.
  • DDR4-2400 MHz is below contemporary SO-DIMM standards (2666 MHz and higher became mainstream after 2017). Newer 3200 MHz modules will downclock to 2400 MHz automatically, eliminating performance gains from faster memory and wasting upgrade investment if targeting speed improvements.
  • Single-channel memory access occurs when using only the SO-DIMM slot without on-board capacity present in parallel. This halves theoretical bandwidth compared to dual-channel configurations, creating latency penalties for multi-threaded workloads and content creation tasks.
  • SO-DIMM form factor limits module length to 67 mm. This physical constraint rules out high-profile heatspreaders or aftermarket cooling solutions; only low-profile variants fit without obstruction from adjacent motherboard components.
  • Warranty retention during RAM upgrades depends on manufacturer policy; SO-DIMM replacement is typically non-invasive and covered under standard support, whereas soldering operations on the main board would void coverage.