ASUS Vivobook M712DA-BX181T RAM upgrade specifications

ASUS M712DA-BX181T ASUS M712DA-BX181T ASUS M712DA-BX181T ASUS M712DA-BX181T ASUS M712DA-BX181T

The ASUS Vivobook 17 M712DA-BX181T features DDR4-SDRAM memory upgrade specifications with one SO-DIMM slot available for expansion. The laptop contains on-board memory combined with one upgradeable SO-DIMM slot, supporting a maximum RAM capacity of 12 GB. Memory operates at 2400 MHz frequency. Compatible upgrades utilize DDR4-SDRAM technology in SO-DIMM form factor for the single available memory slot. Specifications indicate the M712DA-BX181T supports DDR4 memory modules at standard operating speeds.

Memory Upgrade Specifications

SpecificationValue
Memory slots1x SO-DIMM
Form factorOn-board + SO-DIMM
Memory typeDDR4-SDRAM
Frequency2400 MHz
Maximum RAM12 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2400 (PC4-19200)
Bandwidth19.2 GB/s
Laptop Release date07 March 2020

Additional Notes

  • The ASUS Vivobook M712DA-BX181T features a hybrid memory architecture with soldered RAM limiting total capacity to 12 GB regardless of the SO-DIMM module installed.
  • The single accessible slot restricts upgrades to a one-time operation, eliminating dual-channel configuration possibilities that would typically double memory bandwidth.
  • Soldered memory prevents future replacement or repair of the on-board component, requiring motherboard-level service if the integrated RAM fails.
  • The 2400 MHz specification indicates compatibility exclusively with DDR4 modules rated at PC4-19200 or lower speeds, as higher frequency modules will downclock to match the controller's limit.
  • Asymmetric memory configuration resulting from mixed on-board and modular RAM may cause the system to operate in single-channel mode, reducing theoretical bandwidth from 38.4 GB/s to 19.2 GB/s.
  • The 204-pin SO-DIMM form factor requirement excludes standard desktop memory modules, which use the incompatible 288-pin DIMM format.
  • Non-volatile memory capacity determines whether the accessible slot contains a factory-installed module or remains empty, affecting whether an upgrade requires removal or simple insertion.
  • Operating voltage must match DDR4 standards at 1.2V, as modules designed for DDR3L (1.35V) or DDR3 (1.5V) lack physical and electrical compatibility.
  • The 12 GB ceiling suggests either 4 GB or 8 GB of soldered memory, creating module size constraints where installation of a 16 GB SO-DIMM would waste 4 GB to 8 GB of capacity.
  • Warranty preservation requires avoiding dual-rank modules if the system's AMD platform specifically validates only single-rank configurations in combination with soldered memory.