MSI Creator M16 A11UD-842ES RAM upgrade specifications
MSI Creator M16 A11UD-842ES laptop RAM upgrade specifications include DDR4-SDRAM memory compatible with 2x SO-DIMM slots. Maximum supported capacity reaches 64 GB total memory. Upgrade specifications require DDR4 modules operating at 3200 MHz frequency. Compatible memory modules utilize SO-DIMM form factor for portable computing systems. Specifications enable memory configuration modifications for enhanced multitasking and application performance.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 31 July 2021 |
Additional Notes
- The 64 GB maximum capacity requires that both SO-DIMM slots accept 32 GB modules, which necessitates compatibility verification with the chipset and BIOS version before purchase.
- DDR4-3200 operates at 1.2V standard voltage, eliminating the need to verify voltage compatibility with lower-power DDR4L variants that some systems require.
- The dual-channel architecture achieves maximum memory bandwidth of 51.2 GB/s when both slots are populated with matched-speed modules.
- Installing a single module in either slot reduces theoretical memory bandwidth by approximately 50 percent compared to dual-channel configuration, potentially impacting integrated graphics performance.
- SO-DIMM form factor typically requires bottom panel removal for access, though specific disassembly procedures for the MSI Creator M16 A11UD-842ES vary by chassis revision.
- Mixing modules with different CAS latencies forces the memory controller to operate all modules at the highest latency timing, reducing performance compared to matched kits.
- Third-party modules rated above 3200 MHz will downclock to this frequency due to the memory controller's specification ceiling, making higher-speed kits economically inefficient.
- ECC SO-DIMM modules are physically compatible but typically remain non-functional without specific chipset support, which consumer-grade systems generally lack.
- Upgrading from the factory configuration requires transferring existing modules if retaining them, as most systems ship with modules distributed across both slots for dual-channel operation.
- The 11th generation Intel platform supports DDR4 only, preventing future migration to DDR5 without motherboard replacement.