MSI Gaming GE62 6QF Apache Pro 001-HID2 RAM upgrade specifications
MSI GE62 6QF Apache Pro 001-HID2 gaming laptop supports DDR4-SDRAM memory upgrades through 2x SO-DIMM slots. Maximum RAM capacity reaches 32 GB total. Compatible memory modules operate at 2133 MHz frequency and utilize SO-DIMM form factor. Specifications enable users to upgrade from factory-installed memory to higher capacity configurations within the 32 GB maximum supported limit.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2133 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2133 (PC4-17064) |
| Bandwidth | 17.1 GB/s |
| Laptop Release date | 15 February 2018 |
Additional Notes
- The dual channel configuration requirement necessitates installing modules in identical pairs to achieve maximum memory bandwidth for the MSI GE62 6QF Apache Pro 001-HID2.
- Internal access to the 2 SO-DIMM slots requires the removal of the entire base panel which involves penetrating a factory seal sticker.
- Installation of memory modules with frequencies higher than 2133 MHz results in automatic downclocking to match the hardcoded chipset limitations.
- The 32 GB maximum capacity occupies all available slots and prevents further expansion without replacing existing hardware.
- Standard voltage DDR4 modules are required as the motherboard lacks support for legacy low voltage or high voltage overclocking profiles.
- Physical height constraints within the chassis limit compatibility to standard height SO-DIMM modules and exclude those equipped with tall integrated heat spreaders.
- Upgrading memory requires the use of non-conductive prying tools to avoid short-circuiting sensitive surface-mounted components near the retention clips.