MSI Gaming GE76 10UE-081IT Raider RAM upgrade specifications
MSI GE76 10UE-081IT Raider gaming laptop supports DDR4-SDRAM memory upgrade configuration. The system features two SO-DIMM slots for memory expansion, accommodating a maximum RAM capacity of 64 GB. Compatible memory modules operate at 3200 MHz frequency. Upgrade specifications allow for installation of SO-DIMM form factor DDR4 memory to enhance multitasking and gaming performance capabilities of the GE Series Raider model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 01 February 2021 |
Additional Notes
- DDR4-3200 MHz specification indicates compatibility only with DDR4 modules; DDR5 alternatives cannot be installed regardless of physical fit.
- 2 SO-DIMM slots on the MSI GE76 10UE-081IT Raider necessitate removal of existing modules during upgrade, as no additional slots exist for staged memory expansion.
- 64 GB maximum capacity represents a dual-module ceiling; upgrading to 32 GB per stick (2x32 GB configuration) requires both slots to operate at full capacity.
- SO-DIMM form factor constrains upgrade options to laptop-specific modules only; desktop DDR4 UDIMM sticks will not physically insert into the connectors.
- 3200 MHz frequency rating establishes the maximum stable speed; modules rated higher than 3200 MHz will downclock to this specification and offer no performance advantage.
- Two-slot architecture creates a single point of failure for memory subsystem; a defective module disables half the installed capacity until replacement occurs.
- Bandwidth available to the CPU remains subject to the underlying processor's memory controller generation; DDR4-3200 on 10th-generation Intel silicon will not saturate theoretical bandwidth limits under typical workloads.
- Installation without backup power removal risks component damage; warranty coverage may exclude failures traceable to improper electrostatic discharge during module insertion.