MSI Gaming GE78HX 13VI-079US Raider RAM upgrade specifications

MSI GE78HX 13VI-079US Raider MSI GE78HX 13VI-079US Raider MSI GE78HX 13VI-079US Raider MSI GE78HX 13VI-079US Raider MSI GE78HX 13VI-079US Raider

MSI GE78HX 13VI-079US Raider Gaming series laptop supports DDR5-SDRAM memory upgrade specifications. The system features 2x SO-DIMM slots for RAM expansion, accommodating a maximum capacity of 64 GB total memory. Compatible upgrades operate at 5600 MHz frequency. SO-DIMM form factor memory modules are required for upgrade compatibility with this Gaming GE series model. Maximum supported RAM capacity enables significant performance enhancement for demanding applications and multitasking scenarios.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR5-SDRAM
Frequency5600 MHz
Maximum RAM64 GB
Voltage1.1V
Number of pins262-pin
InterfacePC5
PC Speed RatingPC5-5600 (PC5-44800)
Bandwidth44.8 GB/s

Additional Notes

  • The 2 SO-DIMM configuration limits expandability to a single upgrade cycle, as both slots must be populated simultaneously to reach the 64 GB ceiling.
  • DDR5-5600 operates at JEDEC standard voltage of 1.1V, preventing the use of higher voltage enthusiast modules that could cause thermal throttling or POST failures.
  • The MSI GE78HX 13VI-079US Raider's memory controller enforces dual-channel operation only when matched capacity modules occupy both slots, making asymmetric configurations inadvisable.
  • Non-ECC unbuffered modules represent the only compatible specification, as SO-DIMM form factor precludes registered or load-reduced architectures used in server environments.
  • Mixing DDR5-5600 modules with lower speed variants forces the entire subsystem to operate at the slowest module's frequency due to JEDEC synchronization requirements.
  • The 64 GB maximum indicates chipset-level addressing constraints rather than physical slot limitations, making 96 GB or 128 GB configurations impossible regardless of module availability.
  • Warranty preservation requires non-destructive installation, which SO-DIMM slots inherently support through tool-free clip mechanisms that avoid case disassembly beyond bottom panel access.
  • CAS latency timings rated for 5600 MHz operation typically fall between CL40 and CL46, creating measurable performance differences in memory-intensive workloads despite identical frequency specifications.
  • Intel XMP 3.0 profiles may exist on aftermarket modules but require BIOS support to exceed the 5600 MHz JEDEC baseline, with no guarantee of stability at advertised overclocked speeds.
  • The 64 GB capacity ceiling per system translates to 32 GB maximum per slot, eliminating 48 GB single-module options from consideration during upgrade planning.