MSI Gaming GF76 11UC-095UK Katana RAM upgrade specifications
MSI GF76 11UC-095UK Katana gaming laptop features DDR4-SDRAM memory with two SO-DIMM slots supporting maximum capacity of 64 GB RAM. Compatible memory modules operate at 3200 MHz frequency. Upgrade specifications indicate existing memory configuration can be expanded to the 64 GB maximum through DDR4 SO-DIMM modules. The Gaming GF series supports dual-channel memory configuration for enhanced performance. Specifications define compatible memory requirements for RAM upgrades on MSI GF76 11UC-095UK Katana model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 22 July 2021 |
Additional Notes
- The MSI GF76 11UC-095UK Katana uses laptop-class SO-DIMM modules rather than desktop DIMM form factors, requiring memory purchases specifically rated for portable systems and limiting module dimensions to 67.6 x 30 x 7.5 mm.
- DDR4-3200 support indicates the system pairs with 11th-generation Intel processors that operate at this native frequency; aftermarket modules rated above 3200 MHz will downclock to this specification, providing no performance gain while potentially causing stability issues if not explicitly listed on the manufacturer compatibility matrix.
- The 2-slot configuration creates an upgrade ceiling where maximum capacity is 64 GB total, achieved only through dual 32 GB modules; single-slot upgrades beyond 16 GB per module become supply-constrained in the used market, extending sourcing timelines.
- Dual-channel architecture benefits from symmetric module populations; mismatched capacity pairings (8 GB plus 32 GB, for example) will operate in single-channel mode on the larger module, reducing memory bandwidth efficiency by approximately 50 percent and impacting frame rates in memory-intensive gaming workloads.
- Warranty compliance requires verified DDR4 SO-DIMM modules within the 3200 MHz specification range; overclocked or non-standard frequency modules may trigger warranty exclusions on memory-related failures, even if the system remains stable during operation.