MSI Gaming GF76 12UC-011AU Katana RAM upgrade specifications
MSI GF76 12UC-011AU Katana gaming laptop memory upgrade specifications include two SO-DIMM slots supporting DDR4-SDRAM modules at 3200 MHz frequency. Maximum RAM capacity reaches 64 GB when fully populated with compatible memory upgrades. The gaming series accommodates standard SO-DIMM form factor modules for memory expansion and performance enhancement.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 01 August 2022 |
Additional Notes
- Full utilization of the 64 GB capacity requires the physical removal of both pre installed modules because the system lacks additional vacant slots.
- The dual channel architecture provides optimal memory bandwidth for the MSI GF76 12UC-011AU Katana when identical module capacities are installed in both SO DIMM slots.
- System stability depends on using non ECC unbuffered memory modules as the chipset does not support error correction protocols.
- Installation of memory with frequencies higher than 3200 MHz will result in automatic downclocking to meet the hardware timing constraints of the motherboard.
- Accessing the internal memory slots involves removing the base panel which requires a Phillips head screwdriver and careful cable management of the battery connector to prevent electrical shorts.
- Latency performance relies on the JEDEC profile of replacement kits since the mobile BIOS typically lacks XMP profile manual adjustment options.
- Thermal overhead increases slightly when moving from single channel configurations to fully populated dual channel setups during high load gaming tasks.