MSI Gaming GL73 9SDK-408RU RAM upgrade specifications

MSI GL73 9SDK-408RU MSI GL73 9SDK-408RU MSI GL73 9SDK-408RU MSI GL73 9SDK-408RU MSI GL73 9SDK-408RU

The MSI GL73 9SDK-408RU gaming laptop features DDR4-SDRAM memory upgrade specifications with dual SO-DIMM slots supporting maximum capacity of 64 GB RAM. Compatible memory operates at 2666 MHz frequency. The GL series gaming model accommodates SO-DIMM form factor modules for memory expansion, enabling users to upgrade from factory-installed configuration to supported maximum capacity. Specifications indicate two accessible memory slots allowing individual module replacement or simultaneous dual-module installation for full 64 GB capacity upgrade.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency2666 MHz
Maximum RAM64 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2666 (PC4-21328)
Bandwidth21.3 GB/s
Laptop Release date16 September 2019

Additional Notes

  • The MSI GL73 9SDK-408RU supports DDR4 modules exclusively, preventing installation of older DDR3 or newer DDR5 memory due to incompatible pin configurations and voltage requirements.
  • The 2666 MHz frequency represents the maximum validated speed for this platform, meaning higher-rated modules will downclock automatically to match this ceiling.
  • Each SO-DIMM slot accommodates up to 32 GB modules, requiring matched density pairs for symmetric dual-channel operation.
  • Mixing modules with different timings or ranks may force the system to operate at the lowest common denominator, potentially reducing bandwidth efficiency.
  • The SO-DIMM form factor necessitates notebook-specific modules measuring 67.6 mm in length, incompatible with standard desktop DIMM configurations.
  • Dual-channel mode requires population of both slots with identical specifications, as single-module configurations reduce memory bandwidth by approximately 50 percent.
  • Non-ECC unbuffered modules are required, as consumer platforms lack support for error-correcting code memory used in server environments.
  • Installation requires bottom panel removal, which may void manufacturer warranty if seal stickers are disturbed during the upgrade process.
  • Operating voltage must remain at the standard 1.2V for DDR4 compatibility, as the chipset does not support low-voltage or overclocked variants.
  • Thermal constraints within the chassis may affect sustained performance under heavy loads, independent of installed memory capacity.
  • The 64 GB ceiling reflects chipset addressing limitations rather than physical slot restrictions, making larger individual modules unrecognizable even if physically compatible.