MSI Gaming GF66 11UE-496 Katana RAM upgrade specifications
The MSI GF66 11UE-496 Katana gaming laptop features DDR4-SDRAM memory upgrade capabilities. The system contains 2x SO-DIMM slots supporting maximum RAM capacity of 64 GB. Compatible memory modules operate at 3200 MHz frequency and utilize SO-DIMM form factor. Upgrade specifications indicate DDR4 memory types are compatible with this Gaming series model. Maximum memory expansion reaches 64 GB total capacity across both available slots.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 13 December 2021 |
Additional Notes
- Dual channel architecture requires matching pair modules to maximize memory bandwidth for the MSI GF66 11UE-496 Katana during high load gaming or rendering tasks.
- The 64 GB ceiling necessitates the removal of all pre-installed modules because the motherboard lacks soldered memory and only provides 2 physical slots.
- High density 32 GB modules must be single or dual rank non-ECC variety to maintain compatibility with the mobile chipset voltage requirements.
- Mixing modules with different timings results in the system downclocking to the slowest common latency profile which increases memory access delay.
- Accessing the SO-DIMM slots requires the removal of the entire lower chassis panel which may involve piercing a factory seal sticker in certain regions.
- The 3200 MHz frequency remains the peak operational speed regardless of installing faster rated modules due to hardware level controller limitations.
- Integrated graphics stability depends on the shared memory overhead provided by the total system RAM capacity.