MSI Gaming GP62 2QD(Leopard)-089IT RAM upgrade specifications

MSI GP62 2QD(Leopard)-089IT MSI GP62 2QD(Leopard)-089IT MSI GP62 2QD(Leopard)-089IT MSI GP62 2QD(Leopard)-089IT

MSI GP62 2QD(Leopard)-089IT Gaming series laptop supports DDR3L-SDRAM memory upgrade through 2x SO-DIMM slots. Maximum RAM capacity reaches 16 GB total. Memory modules operate at 1600 MHz frequency. Compatible upgrades utilize SO-DIMM form factor specifications. Current memory configuration and available slot capacity determine maximum upgrade potential for this Gaming GP series model.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR3L-SDRAM
Frequency1600 MHz
Maximum RAM16 GB
Voltage1.35V (Low Voltage)
Number of pins204-pin
InterfacePC3L
PC Speed RatingPC3L-1600 (PC3L-12800)
Bandwidth12.8 GB/s
Laptop Release date28 September 2015

Additional Notes

  • The hardware architecture requires 1.35V modules to ensure system stability and prevent voltage mismatch errors common with standard 1.5V DDR3 memory.
  • Dual channel mode is only achievable when both SO-DIMM slots are populated with identical capacity modules, doubling the theoretical memory bandwidth for the MSI GP62 2QD(Leopard)-089IT.
  • The 16 GB ceiling is a strict chipset limitation, meaning 16 GB modules will not be recognized even if they fit the physical slot.
  • Internal access for memory replacement necessitates the removal of the entire base plate, which may involve breaking a factory seal sticker located over a chassis screw.
  • Installing modules with frequencies higher than 1600 MHz will result in automatic downclocking to match the integrated memory controller's maximum clock speed.
  • The use of low voltage SDRAM reduces the thermal footprint within the compact chassis compared to legacy high voltage alternatives.
  • Data integrity depends on non-ECC unbuffered modules as the consumer-grade processor lacks the logic circuits for error correction code memory.