MSI Modern 14 B11MO-038 RAM upgrade specifications
The MSI Modern 14 B11MO-038 laptop features two SO-DIMM slots supporting DDR4-SDRAM memory upgrades. The system supports a maximum RAM capacity of 64 GB total, with compatible modules operating at 3200 MHz frequency. Memory upgrade specifications indicate dual slots for modular memory expansion, allowing users to replace or supplement existing DDR4 modules to increase available system memory capacity.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 11 February 2021 |
Additional Notes
- The MSI Modern 14 B11MO-038 contains 2 SO-DIMM slots that operate independently, meaning asymmetrical configurations (such as 8GB + 16GB) function without penalty, though matched pairs optimize dual-channel bandwidth utilization.
- DDR4-3200 represents the maximum rated speed for this platform; modules rated above 3200 MHz will downclock to 3200 MHz, rendering higher-speed purchases wasteful from both cost and performance perspectives.
- The 64 GB ceiling reflects the addressing limits of the 11th-generation Intel mobile processor architecture paired with the DDR4 memory controller, not the slot configuration; exceeding this capacity remains impossible regardless of module density.
- SO-DIMM form factor necessitates laptop-specific memory modules; desktop DDR4 DIMMs cannot physically install in these slots due to notch position differences, eliminating inventory cross-compatibility with desktop systems.
- Upgrading from factory memory to the 64 GB maximum requires 2x32GB SO-DIMM modules; availability of 32GB individual modules remains limited in retail channels, potentially extending sourcing timelines.
- The dual-slot architecture creates a single point of failure per module; if one SO-DIMM fails, the system becomes non-functional until replacement, unlike multi-slot configurations that may tolerate isolated failures.
- Warranty void risks depend on whether memory installation falls within authorized service; MSI typically permits end-user SO-DIMM replacement without affecting coverage, but documentation verification remains essential before opening the chassis.