MSI Prestige P75 9SE-474NL Creator RAM upgrade specifications
The MSI Prestige P Series P75 9SE-474NL Creator laptop features DDR4-SDRAM memory upgrade specifications with two SO-DIMM slots supporting a maximum RAM capacity of 64 GB. The compatible memory operates at 2666 MHz frequency using SO-DIMM form factor. Memory upgrade specifications indicate slots available for DDR4-SDRAM modules, enabling expansion from the factory-configured capacity to the maximum supported 64 GB configuration.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 04 June 2019 |
Additional Notes
- The MSI Prestige P75 9SE-474NL Creator supports a dual-channel memory configuration, enabling simultaneous data transfer across both slots for doubled theoretical bandwidth compared to single-channel operation.
- The 64 GB ceiling indicates chipset and BIOS limitations rather than slot capacity, restricting individual module size to 32 GB when fully populated.
- Standard DDR4 SO-DIMM modules measure 67.6 mm in length and 30 mm in height, requiring adequate clearance beneath the keyboard assembly during installation.
- The 2666 MHz specification represents JEDEC standard timing rather than overclocked profiles, eliminating XMP configuration requirements in system firmware.
- Upgrading from factory-installed capacity requires removal of existing modules since only 2 physical slots are available, making the original memory redundant.
- Mixing modules with different densities or speeds across the 2 slots may force all installed memory to operate at the lowest common frequency and timing parameters.
- Non-ECC unbuffered modules remain the only compatible type, as SO-DIMM form factor and consumer chipset architecture exclude registered or error-correcting variants.
- Operating voltage is standardized at 1.2V for DDR4, preventing compatibility with DDR3L or earlier generation modules despite potential physical slot similarities.
- Warranty preservation typically requires avoiding case disassembly beyond manufacturer-designated user-accessible panels, though memory upgrades generally fall within permitted modifications.
- Thermal considerations become relevant when operating at maximum 64 GB capacity, as populated slots generate additional heat within the confined laptop chassis during sustained workloads.