MSI Prestige PS42 8M-076 RAM upgrade specifications

MSI PS42 8M-076 MSI PS42 8M-076 MSI PS42 8M-076 MSI PS42 8M-076 MSI PS42 8M-076

MSI Prestige PS42 8M-076 laptop RAM upgrade specifications indicate one SO-DIMM memory slot compatible with DDR4-SDRAM modules. Maximum supported memory capacity reaches 16 GB total. The upgrade slot accommodates SO-DIMM form factor modules operating at 2400 MHz frequency. Compatible DDR4-SDRAM upgrades enable expansion of system memory from factory configuration. Specifications detail single expandable memory slot configuration for Prestige PS series laptop model PS42 8M-076.

Memory Upgrade Specifications

SpecificationValue
Memory slots1x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency2400 MHz
Maximum RAM16 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2400 (PC4-19200)
Bandwidth19.2 GB/s
Laptop Release date15 July 2018

Additional Notes

  • The single SO-DIMM slot configuration prevents dual-channel memory operation, limiting memory bandwidth to half of what dual-channel systems achieve at equivalent speeds.
  • The 16 GB maximum capacity restriction indicates chipset or BIOS limitations that prevent recognition of higher-density modules, even if physically compatible.
  • DDR4-2400 modules operate at lower latency and voltage compared to DDR3 predecessors, reducing heat generation in the confined chassis of this Prestige series ultraportable.
  • Upgrading requires complete replacement of the existing module rather than supplementary installation, making the original memory redundant.
  • The 2400 MHz specification represents JEDEC standard timing; faster modules will downclock to this speed, offering no performance benefit despite higher cost.
  • SO-DIMM physical dimensions measure 67.6 mm compared to standard DIMM at 133.35 mm, reflecting space constraints in the 14-inch form factor.
  • Single-slot architecture may indicate soldered secondary memory on the motherboard, requiring verification before assuming all RAM is user-replaceable.
  • The lack of ECC support in standard DDR4-SDRAM means bit-flip errors remain uncorrected, though this remains statistically negligible for consumer workloads.
  • Memory access patterns in single-channel mode introduce potential bottlenecks when integrated graphics share system RAM for video operations.
  • Module replacement typically requires bottom panel removal, which may void warranty seals depending on regional service policies and manufacturing date.