MSI Workstation WS65 9TK-120UK RAM upgrade specifications
The MSI WS65 9TK-120UK workstation laptop features two SO-DIMM slots for memory expansion. The upgrade supports DDR4-SDRAM modules operating at 2666 MHz frequency. Maximum RAM capacity reaches 64 GB total. Compatible upgrades utilize the SO-DIMM form factor specifications. Current memory configuration and available slots determine upgrade capacity options for this WS65 series model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 10 September 2019 |
Additional Notes
- The internal layout of the MSI WS65 9TK-120UK features a flipped motherboard design where the memory slots face the keyboard side rather than the bottom panel.
- Accessing the SO-DIMM slots requires a full teardown including the removal of the mainboard and disconnection of several delicate ribbon cables.
- Operating 64 GB of memory across 2 slots triggers dual channel bandwidth mode which reduces latency for memory intensive rendering tasks.
- Installation of higher frequency modules results in automatic downclocking to the 2666 MHz hardware ceiling dictated by the chipset architecture.
- Upgrading memory requires the removal of factory seal stickers which may impact local warranty terms depending on regional service policies.
- The use of 32 GB high density modules is necessary to reach the maximum capacity due to the physical limitation of 2 available slots.
- Thermal management remains a critical factor during sustained workloads as the memory modules sit in close proximity to the ultra thin cooling pipes.