ACER Aspire A515-56G-59TZ RAM upgrade specifications
The ACER Aspire 5 Series model A515-56G-59TZ supports DDR4-SDRAM memory upgrade specifications. The laptop contains one SO-DIMM memory slot available for upgrade, with a maximum RAM capacity of 20 GB. The upgrade memory operates at 2133 MHz frequency. Compatible memory modules must match DDR4-SDRAM specifications for proper functionality. The configuration combines on-board memory with the SO-DIMM slot to reach maximum capacity.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 1x SO-DIMM |
| Form factor | On-board + SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2133 MHz |
| Maximum RAM | 20 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2133 (PC4-17064) |
| Bandwidth | 17.1 GB/s |
| Laptop Release date | 22 October 2020 |
Additional Notes
- The presence of on-board memory means a portion of the system RAM is non-removable and soldered directly to the motherboard.
- The ACER Aspire A515-56G-59TZ employs an asymmetrical memory configuration where a 4 GB soldered module combines with a 16 GB module to reach the 20 GB ceiling.
- Dual-channel memory performance only functions across the capacity of the smaller soldered module while the remaining capacity of the larger SO-DIMM operates in single-channel mode.
- System latency is dictated by the slowest memory module because the motherboard synchronizes the frequency of the expandable slot to match the fixed on-board chip speed.
- Installation of high-frequency DDR4 modules results in automatic downclocking to 2133 MHz due to chipset limitations or soldered memory clock constraints.
- Upgrading the single available SO-DIMM slot excludes the possibility of future capacity expansion without discarding the existing removable module.
- Integrated graphics performance relies heavily on the shared bandwidth of the soldered and removable memory units.