ACER Aspire AV15-51-54QD RAM upgrade specifications
The ACER Aspire Vero AV15-51-54QD contains DDR4-SDRAM memory with one accessible SO-DIMM slot for upgrades. The laptop features on-board memory combined with a single SO-DIMM slot configuration. Maximum supported RAM capacity reaches 12 GB total. The memory operates at 2133 MHz frequency. Compatible DDR4 modules can be installed in the available slot to expand the system's memory specifications.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 1x SO-DIMM |
| Form factor | On-board + SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2133 MHz |
| Maximum RAM | 12 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2133 (PC4-17064) |
| Bandwidth | 17.1 GB/s |
| Laptop Release date | 15 October 2021 |
Additional Notes
- The presence of on-board memory means that a portion of the total system RAM is soldered directly to the motherboard and cannot be replaced or upgraded.
- The ACER Aspire AV15-51-54QD utilizes an asymmetric memory configuration where the single expansion slot determines the final capacity limit above the base soldered amount.
- Installing a high-speed module will result in a forced downclocking to the 2133 MHz frequency dictated by the hardware bus limitations.
- Dual-channel memory performance is restricted to the capacity of the smallest module since any memory exceeding the capacity of the soldered chip will operate in single-channel mode.
- System stability depends on matching the voltage requirements of the permanent on-board memory when selecting a module for the single SO-DIMM slot.
- Thermal constraints within the chassis necessitate the use of low-profile memory modules to ensure proper fitment and airflow over the motherboard components.
- The 12 GB maximum threshold suggests a specific hardware BIOS limitation that prevents the motherboard from addressing higher density memory sticks regardless of physical fitment.