ASUS ROG G614JU-N3110W RAM upgrade specifications
The ASUS ROG Strix G16 G614JU-N3110W features DDR5-SDRAM memory specifications supporting upgrade configurations. The laptop contains 2x SO-DIMM slots for memory expansion. Maximum RAM capacity reaches 32 GB total. Compatible memory modules operate at 4800 MHz frequency. Upgrade options utilize SO-DIMM form factor memory modules. Specifications enable flexible memory configurations for enhanced system performance and multitasking capabilities.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR5-SDRAM |
| Frequency | 4800 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.1V |
| Number of pins | 262-pin |
| Interface | PC5 |
| PC Speed Rating | PC5-4800 (PC5-38400) |
| Bandwidth | 38.4 GB/s |
Additional Notes
- The ASUS ROG G614JU-N3110W contains 2 SO-DIMM slots, limiting maximum capacity to 32 GB total. Asymmetrical configurations (16 GB + 8 GB modules) will operate both modules at the slower speed due to dual-channel synchronization requirements.
- DDR5-4800 modules are designed for this platform, but DDR5-5600 or higher frequency modules will downclock to 4800 MHz, negating performance gains while increasing component cost without benefit.
- The 2-slot architecture means any RAM upgrade requires removing at least 1 existing module. Factory-installed modules must be documented before replacement to avoid compatibility mismatches during the upgrade process.
- SO-DIMM modules occupy confined spaces beneath the keyboard assembly on this laptop family. Thermal interference from adjacent components can reduce heat dissipation during sustained workloads, particularly with high-frequency DDR5 modules generating additional thermal output.
- Upgrading to the 32 GB maximum with 2x16 GB modules preserves dual-channel performance and reduces future upgradeability. No expansion path exists beyond this configuration.
- Memory compatibility must account for the laptop's BIOS version, as early firmware revisions may not recognize DDR5 modules released after the manufacturing date. BIOS updates may be required before installation.