ASUS ROG G614PR-RV016W RAM upgrade specifications

ASUS G614PR-RV016W ASUS G614PR-RV016W ASUS G614PR-RV016W ASUS G614PR-RV016W ASUS G614PR-RV016W

ASUS ROG Strix G16 G614PR-RV016W RAM upgrade specifications include DDR5-SDRAM memory modules with 5200 MHz frequency. The laptop contains 2x SO-DIMM memory slots supporting maximum RAM capacity of 32 GB. Compatible memory upgrades require DDR5-SDRAM SO-DIMM form factor modules. Specifications enable users to upgrade memory for enhanced multitasking and performance capabilities on this gaming laptop model.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR5-SDRAM
Frequency5200 MHz
Maximum RAM32 GB
Voltage1.1V
Number of pins262-pin
InterfacePC5
PC Speed RatingPC5-5200 (PC5-41600)
Bandwidth41.6 GB/s

Additional Notes

  • The 2 SO-DIMM slot configuration limits expansion to a maximum of 32 GB total capacity, meaning single-module upgrades cannot exceed 16 GB per slot to reach the ceiling.
  • DDR5-5200 MHz operation requires compatible modules specifically rated for this speed; DDR5 modules rated below 5200 MHz will operate at reduced frequencies, potentially lowering system performance relative to design specifications.
  • SO-DIMM form factor restricts upgrades to laptop-grade memory modules; desktop DDR5 UDIMM or RDIMM sticks are physically incompatible and cannot be installed.
  • Upgrading the ASUS ROG G614PR-RV016W beyond the factory configuration requires removing existing modules entirely, as the 2-slot architecture does not permit additive expansion without slot reallocation.
  • Memory bandwidth saturation occurs when both slots operate simultaneously at 5200 MHz; single-slot configurations do not fully utilize available memory bus width, resulting in asymmetric performance on dual-channel dependent workloads.
  • Warranty preservation during memory upgrades depends on using unbuffered, non-ECC SO-DIMM modules; registered or error-correcting variants may trigger incompatibility flags in BIOS POST sequences.
  • Thermal constraints in the G614PR chassis may require modules with passive heat spreaders rather than active cooling; tall module profiles risk interference with internal heatsink or fan assemblies during installation.