ASUS ROG G815LR-S8080W RAM upgrade specifications
ASUS ROG Strix G18 model G815LR-S8080W supports DDR5-SDRAM memory upgrades with specifications including 2x SO-DIMM slots and maximum RAM capacity of 64 GB. Compatible upgrade modules operate at 5600 MHz frequency using SO-DIMM form factor. Memory upgrade slots allow installation of additional DDR5 modules to enhance system performance specifications on this gaming laptop model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR5-SDRAM |
| Frequency | 5600 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.1V |
| Number of pins | 262-pin |
| Interface | PC5 |
| PC Speed Rating | PC5-5600 (PC5-44800) |
| Bandwidth | 44.8 GB/s |
Additional Notes
- Utilizing both SO-DIMM slots for a dual-channel configuration is necessary to maximize processor throughput and prevent memory bandwidth bottlenecks during high-demand computational tasks.
- The maximum supported capacity of 64 GB requires the installation of two 32 GB modules, as 64 GB single-stick configurations exceed the architectural limits of this hardware platform.
- The **ASUS ROG G815LR-S8080W** hardware architecture necessitates DDR5 modules with on-die ECC support to maintain system stability at high clock frequencies.
- Mixing modules with different latency timings or voltage profiles will result in the system defaulting to the lowest common denominator, potentially reducing the operational frequency below the 5600 MHz rating.
- Physical installation of memory requires a non-conductive pry tool to safely detach the bottom chassis panel without damaging internal retention clips or the delicate ribbon cables for integrated lighting components.
- The move to a 5600 MHz frequency provides significantly higher data transfer rates compared to previous DDR4 standards but also increases heat generation within the memory area, requiring adequate thermal dissipation from the internal cooling solution.
- Replacing factory-installed memory does not void the standard manufacturer warranty provided the internal components are not physically damaged during the manual swap process.