ASUS ROG G532LWS-XS96 RAM upgrade specifications
ASUS ROG Strix SCAR 15 G532LWS-XS96 laptop features two SO-DIMM memory slots supporting DDR4-SDRAM upgrades at 3200 MHz frequency. Maximum RAM capacity reaches 32 GB total. Compatible memory modules must match DDR4-SDRAM specifications and SO-DIMM form factor. Current upgrade configurations allow installation of matching capacity modules up to 16 GB per slot for maximum memory expansion. Specifications indicate DDR4-3200 MHz compatibility for optimal performance with supported memory upgrades on this gaming laptop model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 31 May 2020 |
Additional Notes
- The ASUS ROG G532LWS-XS96 requires SO-DIMM modules exclusively, which eliminates compatibility with standard DIMM memory used in desktop systems.
- The 32 GB maximum capacity constraint indicates a chipset or BIOS limitation that prevents recognition of higher-density modules beyond 16 GB per slot.
- DDR4-3200 represents the maximum validated frequency for this platform, though higher-rated modules will function through automatic downclocking to this speed.
- Systems shipping with lower-frequency RAM can accept 3200 MHz modules, but dual-channel population requires matched specifications across both slots to avoid reverting to the slower module's timings.
- The 2-slot configuration means any capacity upgrade requires replacing existing modules rather than supplementing them, preventing incremental expansion.
- SO-DIMM installation in laptops typically requires bottom panel removal, which may involve warranty seal displacement depending on regional regulations and manufacturer policies.
- Mixing module capacities between slots maintains functionality but may introduce asymmetric dual-channel operation, where only the matched portions operate in dual-channel mode.
- Non-ECC unbuffered modules are required, as SO-DIMM form factor ECC variants would be rejected by consumer-grade memory controllers in gaming platforms.
- Voltage specifications must remain at standard 1.2V for DDR4, as gaming laptops lack BIOS options to adjust memory voltage found in desktop equivalents.
- Third-party modules require identical CAS latency profiles to factory-installed memory to prevent stability issues from timing mismatches during boot initialization.