ASUS TUF Gaming FA706IHR-RS53 RAM upgrade specifications
The ASUS TUF Gaming A17 FA706IHR-RS53 features DDR4-SDRAM memory upgrade specifications with 2x SO-DIMM slots supporting maximum capacity of 32 GB. The laptop accommodates SO-DIMM form factor memory modules operating at 3200 MHz frequency. Upgrade options allow installation of compatible DDR4 memory modules in the available slots to expand system RAM beyond factory configuration. Specifications define compatible memory parameters for expanding storage and performance capabilities within the maximum supported capacity limits of the FA706IHR-RS53 model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 16 July 2022 |
Additional Notes
- The ASUS TUF Gaming FA706IHR-RS53 accommodates 2 SO-DIMM slots with a theoretical maximum of 32 GB total capacity, establishing a ceiling of 16 GB per module for symmetric dual-channel operation.
- DDR4-3200 MHz compatibility constrains memory selection to modules rated for 3200 MHz or lower; faster DDR4 variants (3600 MHz, 4000 MHz) will downclock to 3200 MHz, negating performance gains and creating unnecessary incompatibility risk during POST.
- SO-DIMM form factor restricts upgrades to laptop-specific memory modules; desktop DDR4 DIMM modules are mechanically incompatible and cannot be physically inserted into the slots.
- Populating both slots simultaneously requires matched or compatible XMP/DOCP profiles to maintain stable dual-channel bandwidth; mismatched timings or voltage specifications may trigger memory training failures or force operation at JEDEC defaults below rated frequency.
- The 2-slot architecture offers no upgrade redundancy; failure of a single populated module disables the system entirely, unlike multi-slot configurations that permit partial degraded operation.
- SO-DIMM modules occupy approximately 67 mm length and require minimal clearance; internal chassis geometry may impose restrictions on heatspreader height, particularly for modules rated above JEDEC specifications.
- Warranty coverage typically remains intact for DDR4-3200 SO-DIMM upgrades from recognized manufacturers, provided specifications align with JEDEC standards; overclocked or non-standard modules may void memory-related coverage.