ASUS TUF Gaming FX506HCB-HN162T RAM upgrade specifications
ASUS TUF Gaming F15 series model FX506HCB-HN162T features DDR4-SDRAM memory upgrade specifications. The laptop contains 2x SO-DIMM slots supporting maximum RAM capacity of 32 GB total. Compatible memory modules operate at 3200 MHz frequency. Upgrade specifications indicate DDR4 SO-DIMM form factor modules are required for expansion or replacement within the two available slots. Maximum supported capacity reaches 32 GB for memory upgrades on compatible configurations.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 10 July 2021 |
Additional Notes
- The ASUS TUF Gaming FX506HCB-HN162T uses DDR4 SO-DIMM modules, which are laptop-specific and incompatible with desktop DDR4 UDIMM form factors, restricting upgrade sources to mobile-grade memory stock.
- With 2 SO-DIMM slots and 32 GB maximum capacity, each slot supports 16 GB modules maximum, meaning full capacity requires replacing both original memory modules rather than adding to existing inventory.
- The 3200 MHz frequency specification indicates support for standard mobile DDR4 speeds; however, mixing different speed grades within the 2 slots may trigger automatic downclocking to the slowest module's rated speed, reducing effective bandwidth.
- SO-DIMM memory upgrades typically require removing the bottom access panel and reseating modules at a 45-degree angle before pressing flat until retention clips engage, a procedure that may void certain warranty coverage if performed outside authorized service channels.
- The dual-slot architecture creates a memory capacity ceiling at 32 GB; workloads requiring greater than 32 GB RAM capacity cannot be accommodated through hardware upgrade on this platform.
- DDR4-3200 memory operates at 1.2 volts standard; purchasing modules rated above 1.35 volts may cause compatibility rejection during POST or generate thermal throttling, as mobile BIOS typically applies conservative voltage guardrails.