ASUS TUF Gaming FX506LH-HN082T RAM upgrade specifications
ASUS TUF Gaming F15 FX506LH-HN082T RAM upgrade specifications indicate DDR4-SDRAM memory compatibility with 2x SO-DIMM slots available for expansion. Maximum RAM capacity reaches 32 GB total, with memory operating at 2933 MHz frequency. SO-DIMM form factor modules are required for compatible upgrades to this laptop model. Current memory configuration and available slots enable users to expand system RAM according to specifications.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2933 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2933 (PC4-23464) |
| Bandwidth | 23.5 GB/s |
| Laptop Release date | 19 October 2021 |
Additional Notes
- The ASUS TUF Gaming FX506LH-HN082T uses SO-DIMM slots, which means only laptop-format memory modules will physically fit; standard desktop DDR4 DIMMs cannot be installed regardless of electrical compatibility.
- The 2933 MHz frequency specification indicates the system will operate at this speed regardless of higher-frequency modules installed, as the memory controller is locked to this specification and will not support XMP or DOCP profiles.
- Dual slot configuration with a 32 GB maximum capacity creates an asymmetric upgrade path; installing a single 32 GB module leaves one slot unused, while matching pairs require either 2x16 GB for capacity or 2x8 GB if the original configuration used smaller modules.
- DDR4-SDRAM at 2933 MHz bandwidth (approximately 46.9 GB/s per channel) can create memory latency bottlenecks during sustained GPU-accelerated tasks or when the dedicated graphics processor requests data faster than the dual-channel bus can deliver, particularly in gaming scenarios with high-resolution textures.
- Upgrading beyond the factory configuration requires removing the base memory first to access both slots, as many laptops with 2x SO-DIMM layouts have one module soldered or blocked by internal components; warranty-safe upgrades should confirm the existing memory is removable before purchasing replacement modules.
- SO-DIMM modules generate higher thermal density than desktop memory due to compact packaging; installation in confined laptop chassis may require thermal pads or spacing verification to prevent throttling if the system's thermal design pushes memory operating temperature above 45 degrees Celsius.