ASUS TUF Gaming FX507ZC4-HN009 RAM upgrade specifications
The ASUS TUF Gaming F15 FX507ZC4-HN009 features DDR4-SDRAM memory with 2x SO-DIMM slots supporting maximum capacity of 32 GB RAM. The upgrade specifications indicate compatible memory operates at 3200 MHz frequency with SO-DIMM form factor. This laptop model accommodates dual-channel memory configuration for enhanced performance. Upgrade capacity reaches 16 GB per slot, allowing full utilization of available memory slots to achieve maximum specifications of 32 GB total RAM.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 01 March 2023 |
Additional Notes
- The ASUS TUF Gaming FX507ZC4-HN009 uses SO-DIMM slots, which means only laptop-grade memory modules will fit; desktop DDR4 DIMMs are physically incompatible and cannot be forced into the sockets without causing permanent damage.
- With 2 slots and a 32 GB ceiling, the maximum configuration requires 2x16 GB modules; single-module upgrades will leave one slot empty, which provides no performance benefit from dual-channel memory operation compared to a full 2x16 GB installation.
- The 3200 MHz specification defines the rated speed, but actual performance depends on BIOS support and the specific module's SPD settings; modules rated above 3200 MHz will typically downclock to this speed due to memory controller limitations in the chipset.
- Removing or replacing memory typically does not void warranty if the user avoids static discharge and does not damage surrounding components; however, any physical access should be performed on a grounded work surface with powered-off and unplugged hardware.
- DDR4-SDRAM operates at lower voltages (1.2 volts) than older DDR3 standards; mixing DDR4 with mismatched voltage specifications or non-ECC variants rated for different profiles may cause boot failures or memory errors even if the modules are otherwise compatible.
- Upgrading from the factory configuration to the 32 GB maximum increases bandwidth availability for multithreaded workloads, but memory latency remains determined by the module's CAS latency rating, which is not specified in the base configuration and should be verified before purchase.