ASUS Vivobook X412FA-EB021T-BE RAM upgrade specifications
ASUS Vivobook 14 series model X412FA-EB021T-BE supports DDR4-SDRAM memory upgrades. The laptop features one SO-DIMM slot for RAM expansion, with maximum compatible memory capacity of 12 GB. Memory operates at 2400 MHz frequency. Upgrade specifications indicate on-board memory combined with single SO-DIMM slot configuration for this compatible RAM upgrade option.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 1x SO-DIMM |
| Form factor | On-board + SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2400 MHz |
| Maximum RAM | 12 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2400 (PC4-19200) |
| Bandwidth | 19.2 GB/s |
| Laptop Release date | 25 April 2019 |
Additional Notes
- The ASUS Vivobook X412FA-EB021T-BE features a hybrid memory architecture with soldered RAM on the motherboard plus a single accessible SO-DIMM slot, preventing complete memory replacement.
- The 12 GB maximum capacity indicates 4 GB permanently soldered to the motherboard, limiting the upgradeable SO-DIMM slot to an 8 GB module.
- The single SO-DIMM configuration prevents dual-channel memory operation across the full capacity, as the soldered component operates independently from the socketed module.
- Installing a module with frequency higher than 2400 MHz will result in automatic downclocking to match the system specification, making faster RAM purchases economically inefficient.
- The permanent onboard memory component eliminates the possibility of warranty-safe removal or replacement if the soldered RAM fails.
- Mismatched capacity between the soldered 4 GB and any installed SO-DIMM module larger than 4 GB creates asymmetric memory configuration affecting bandwidth optimization.
- The physical SO-DIMM slot typically requires bottom panel removal for access, though specific disassembly procedures vary by chassis design.
- DDR4 SO-DIMM voltage standard of 1.2V must be maintained, as non-standard voltage modules may cause system instability or boot failures.
- The 2400 MHz specification corresponds to PC4-19200 module rating, which must match or the system will reject incompatible speed grades during POST.
- The single-slot limitation means capacity upgrades require complete replacement of any existing SO-DIMM module rather than incremental additions.