ASUS Vivobook F512UF-EJ060T-BE RAM upgrade specifications

ASUS F512UF-EJ060T-BE ASUS F512UF-EJ060T-BE ASUS F512UF-EJ060T-BE ASUS F512UF-EJ060T-BE ASUS F512UF-EJ060T-BE

ASUS Vivobook 15 Series F512UF-EJ060T-BE contains DDR4-SDRAM memory upgrade specifications. The laptop features one SO-DIMM slot for memory expansion, with onboard memory also present. Maximum compatible RAM capacity reaches 12 GB total. Memory operates at 2400 MHz frequency. Upgrade slots accept standard SO-DIMM form factor modules. The specifications indicate partial memory upgradability through the single available SO-DIMM slot, allowing users to expand total memory capacity beyond factory configuration.

Memory Upgrade Specifications

SpecificationValue
Memory slots1x SO-DIMM
Form factorOn-board + SO-DIMM
Memory typeDDR4-SDRAM
Frequency2400 MHz
Maximum RAM12 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2400 (PC4-19200)
Bandwidth19.2 GB/s
Laptop Release date18 March 2019

Additional Notes

  • The ASUS Vivobook F512UF-EJ060T-BE ships with soldered memory, meaning 4 GB of the maximum 12 GB capacity cannot be replaced, only the 1 SO-DIMM slot can receive upgrades.
  • DDR4-2400 MHz operates at lower throughput than contemporary DDR4-2666 or DDR4-3200 modules, so installing faster memory will default to 2400 MHz due to JEDEC standard compliance, yielding no performance gain from higher-frequency sticks.
  • The single SO-DIMM slot permits only 8 GB maximum expansion, capping total system memory at 12 GB, which creates a hard ceiling for multitasking workloads requiring 16 GB or more.
  • SO-DIMM DDR4-2400 modules are less common in retail markets than DDR4-2666 variants, increasing sourcing difficulty and potential cost premium for warranty-safe replacement sticks.
  • The 12 GB total memory configuration generates asymmetrical memory population (soldered 4 GB plus 8 GB SO-DIMM), which can introduce minor latency penalties compared to symmetrical dual-channel configurations on systems supporting 2 identical sticks.
  • Upgrading requires physical disassembly of the base plate to access the SO-DIMM slot; this procedure may void manufacturer warranty if executed outside authorized service channels, so verification of warranty terms is necessary before proceeding with installation.