ASUS Vivobook S512FA-BR160R RAM upgrade specifications

ASUS S512FA-BR160R ASUS S512FA-BR160R ASUS S512FA-BR160R ASUS S512FA-BR160R ASUS S512FA-BR160R

ASUS Vivobook 15 Series S512FA-BR160R RAM upgrade specifications include one SO-DIMM memory slot supporting DDR4-SDRAM modules at 2400 MHz frequency. The laptop features on-board memory combined with one upgradeable SO-DIMM slot. Maximum compatible RAM capacity reaches 16 GB total. Memory upgrade specifications indicate SO-DIMM form factor compatibility for replacement or expansion of RAM modules within the available slot. DDR4-SDRAM specifications provide standard memory compatibility for this Vivobook model.

Memory Upgrade Specifications

SpecificationValue
Memory slots1x SO-DIMM
Form factorOn-board + SO-DIMM
Memory typeDDR4-SDRAM
Frequency2400 MHz
Maximum RAM16 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2400 (PC4-19200)
Bandwidth19.2 GB/s
Laptop Release date26 February 2019

Additional Notes

  • The ASUS Vivobook S512FA-BR160R features a hybrid memory architecture combining soldered RAM with a single expansion slot, limiting upgrade flexibility compared to dual-slot configurations.
  • The 16 GB maximum capacity constraint applies to the combined total of both soldered and socketed memory modules, not to the SO-DIMM slot alone.
  • Systems with pre-installed soldered memory require determining the onboard capacity before selecting a compatible SO-DIMM module to avoid exceeding the 16 GB ceiling.
  • DDR4-2400 represents the baseline specification, though installing higher-frequency modules remains possible as they will downclock to match the system's supported speed.
  • Single-channel bandwidth applies to any memory operating independently, while dual-channel performance requires matching capacity and specifications between the soldered and socketed modules.
  • The SO-DIMM form factor requires modules with 260-pin connectors specifically designed for mobile platforms, incompatible with standard desktop DIMM memory.
  • Accessing the single memory slot typically requires bottom panel removal, with potential warranty implications depending on regional service policies and seal integrity.
  • Mixed-capacity configurations between soldered and SO-DIMM memory function in flex mode, operating in dual-channel only for the matched portion and reverting to single-channel for the remainder.
  • Non-ECC unbuffered modules represent the standard requirement for consumer laptop platforms, as registered or ECC variants introduce compatibility failures.
  • The 2400 MHz frequency operates at DDR4-2400 PC4-19200 specification, translating to 19200 MB/s theoretical bandwidth per channel under dual-channel operation.