ASUS Vivobook TP412FA-EC079T RAM upgrade specifications
ASUS Vivobook Flip TP412FA-EC079T laptop supports DDR4-SDRAM memory upgrades through a single SO-DIMM slot. The device features on-board memory combined with one expandable SO-DIMM slot, allowing maximum RAM capacity of 12 GB. Memory operates at 2400 MHz frequency. Compatible upgrade modules must match DDR4-SDRAM specifications and SO-DIMM form factor to ensure proper functionality with the existing on-board configuration.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 1x SO-DIMM |
| Form factor | On-board + SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2400 MHz |
| Maximum RAM | 12 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2400 (PC4-19200) |
| Bandwidth | 19.2 GB/s |
| Laptop Release date | 27 September 2019 |
Additional Notes
- The ASUS Vivobook TP412FA-EC079T incorporates a hybrid memory architecture with soldered RAM complementing the single SO-DIMM slot, limiting future expansion flexibility compared to dual-slot configurations.
- The 12 GB maximum capacity constraint indicates 4 GB soldered onboard, leaving only 8 GB available through the SO-DIMM slot regardless of module size installed.
- Installing a module smaller than 8 GB results in total system memory below the advertised maximum, potentially underutilizing the platform's supported capacity.
- The 2400 MHz frequency requires compatible modules operating at DDR4-2400 speeds, as higher-rated modules will downclock to match this limitation.
- Single-channel bandwidth applies when only onboard memory operates alone, while dual-channel mode activates when the SO-DIMM slot contains a populated module.
- The soldered component prevents memory access for troubleshooting or replacement if the onboard chip develops faults during the device lifespan.
- Upgrading maintains warranty validity as the accessible SO-DIMM slot allows user-serviceable memory installation without breaching sealed components.
- Mixing memory from different manufacturers between the soldered chip and SO-DIMM module may introduce minor latency variations, though compatibility remains functional.
- The SO-DIMM form factor requires laptop-specific modules measuring approximately 67.6 mm in length, distinguishing them from desktop DIMM standards.
- Voltage specification adheres to DDR4 standard 1.2V requirements, eliminating compatibility concerns related to low-voltage variants common in older DDR3 systems.