ASUS Vivobook N705FD-GC064T-BE RAM upgrade specifications
ASUS Vivobook Pro N705FD-GC064T-BE laptop accommodates DDR4-SDRAM memory upgrades through two SO-DIMM slots. Maximum supported capacity reaches 16 GB total memory. Compatible RAM modules operate at 2400 MHz frequency. Specifications enable users to expand memory configuration from factory-installed capacity up to the maximum threshold. SO-DIMM form factor designates the physical specifications for compatible upgrade modules. Memory slots accommodate standard laptop-grade RAM components meeting DDR4 standards for this particular Vivobook Pro model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2400 MHz |
| Maximum RAM | 16 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2400 (PC4-19200) |
| Bandwidth | 19.2 GB/s |
| Laptop Release date | 10 January 2019 |
Additional Notes
- The presence of 2 physical SO-DIMM slots implies that reaching the maximum capacity requires a paired module configuration to enable dual-channel memory bandwidth.
- The 2400 MHz frequency limit indicates that installing higher-rated modules will result in an automatic downclocking to match the motherboard bus speed.
- Replacing internal memory components on the ASUS Vivobook N705FD-GC064T-BE requires the removal of the entire base casing which involves standard Philips screws and plastic clips.
- Data transfer rates are restricted by the DDR4-SDRAM architecture causing a hardware bottleneck if professional video editing or heavy multitasking exceeds the 16 GB threshold.
- System stability depends on using non-ECC unbuffered modules because the chipset does not support error-correcting code memory.
- The 16 GB ceiling prevents the installation of 16 GB or 32 GB single sticks as the BIOS will likely fail to POST or recognize the full capacity.
- Latency performance remains static since the motherboard profile does not support XMP or manual timing adjustments in the firmware.