DELL Inspiron 5406 RAM upgrade specifications
The DELL Inspiron 5000 Series 5406 laptop features DDR4-SDRAM memory upgrade specifications with two SO-DIMM slots. Maximum RAM capacity reaches 16 GB total. Compatible memory modules operate at 3200 MHz frequency. Upgrade slots support SO-DIMM form factor modules. Specifications enable memory expansion for enhanced multitasking performance on the DELL 5406 model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 16 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 26 October 2020 |
Additional Notes
- Dual channel architecture is achievable by installing matched capacity modules in both slots to improve integrated graphics performance.
- The maximum capacity cap indicates a hardware or firmware limitation that prevents the use of 16 GB or 32 GB high density sticks.
- Utilization of SO-DIMM slots in the DELL Inspiron 5406 allows for manual replacement of existing memory without specialized soldering equipment.
- Higher frequency RAM modules will automatically downclock to the 3200 MHz system limit if the processor bus cannot sustain faster transfer rates.
- Physical access to the motherboard for memory installation requires removal of the base cover which may contain captive screws to prevent hardware loss.
- Populating both slots results in lower latency compared to single channel configurations when handling memory intensive multitasking workloads.
- Internal space constraints within the chassis necessitate the use of standard height modules rather than those equipped with large integrated heat spreaders.