FUJITSU LIFEBOOK E544 RAM upgrade specifications
The FUJITSU LIFEBOOK E544 laptop features two SO-DIMM memory slots supporting DDR3L-SDRAM modules. The maximum RAM capacity is 16 GB, with compatible memory operating at 1600 MHz frequency. Upgrade specifications indicate the E544 model accommodates SO-DIMM form factor memory modules, allowing users to expand system RAM up to the maximum supported capacity of 16 GB total.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR3L-SDRAM |
| Frequency | 1600 MHz |
| Maximum RAM | 16 GB |
| Voltage | 1.35V (Low Voltage) |
| Number of pins | 204-pin |
| Interface | PC3L |
| PC Speed Rating | PC3L-1600 (PC3L-12800) |
| Bandwidth | 12.8 GB/s |
| Laptop Release date | 21 November 2018 |
Additional Notes
- The DDR3L designation requires low-voltage modules operating at 1.35V rather than standard 1.5V DDR3, preventing compatibility with non-L variants.
- SO-DIMM form factor indicates laptop-specific memory modules approximately half the length of desktop DIMMs, making desktop RAM physically incompatible.
- The 16 GB maximum capacity limits each slot to 8 GB modules, as installing higher-density modules will not exceed the controller's addressing capability.
- Single-channel operation occurs when only 1 slot is populated, reducing memory bandwidth by approximately 50% compared to dual-channel configuration with matched modules.
- PC3L-12800 represents the alternative designation for DDR3L-1600, relevant when cross-referencing module specifications during procurement.
- Mixing modules of different speeds forces all memory to operate at the lowest common frequency, potentially underclocking 1866 MHz or 2133 MHz modules to 1600 MHz.
- Dual-rank modules may encounter compatibility issues even within the 16 GB limit, as some chipsets restrict rank combinations per channel.
- Non-matching module capacities between slots maintains functionality but prevents optimal dual-channel interleaving across the full memory range.
- ECC SO-DIMM modules are incompatible unless explicitly supported by the chipset, as consumer-grade platforms typically lack error-correction circuitry.
- Access panel location determines whether RAM replacement qualifies as user-serviceable or requires professional disassembly affecting warranty status.
- CAS latency variations (CL9, CL11) within DDR3L-1600 specification affect performance minimally but may cause POST failures if modules cannot negotiate common timings.