MSI Creator 15 A11UH-493AU RAM upgrade specifications
The MSI Creator 15 A11UH-493AU laptop features two SO-DIMM slots for DDR4-SDRAM memory upgrade. Maximum supported memory capacity reaches 64 GB total. Compatible memory modules operate at 3200 MHz frequency. The upgrade specifications indicate SO-DIMM form factor memory modules are required for compatibility with this MSI model. Existing memory can be expanded to the maximum capacity through the available slots.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 28 September 2021 |
Additional Notes
- Dual channel memory architecture requires installing a pair of identical modules to achieve peak bandwidth for content creation workflows.
- The MSI Creator 15 A11UH-493AU facilitates high capacity multi tasking through its 2 independent physical slots which permit replacing the factory hardware entirely.
- System stability relies on using 1.2V modules because higher voltage overclocking profiles lack native firmware support in this mobile chipset.
- Upgrading to the 64 GB limit involves removing all existing pre installed memory since the motherboard lacks soldered base memory.
- Latency performance depends on choosing modules with JEDEC 3200 timing profiles because the platform does not typically support XMP manual adjustments in the standard BIOS.
- Internal access for memory replacement necessitates the removal of the entire bottom chassis panel which may involve piercing a factory seal sticker in certain regions.
- Thermal constraints within the slim chassis favor modules without thick integrated heat spreaders to ensure proper clearance when the case is closed.