MSI Creator B11UE-008EN RAM upgrade specifications
MSI Creator 17M B11UE-008EN laptop features DDR4-SDRAM memory upgrade capacity with 2x SO-DIMM slots supporting maximum RAM configuration of 64 GB. Compatible memory specifications operate at 3200 MHz frequency. The SO-DIMM form factor enables memory upgrade compatibility for enhanced system performance. Existing memory modules can be replaced or expanded within the dual-slot architecture to reach maximum specifications of 64 GB total RAM capacity.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 16 April 2021 |
Additional Notes
- The MSI Creator B11UE-008EN contains 2 SO-DIMM slots operating at 3200 MHz, which establishes a hard ceiling of 64 GB total capacity. Upgrading to the maximum requires installing matched pairs; mismatched capacity modules will force the system into single-channel mode, reducing memory bandwidth by approximately 50 percent and degrading performance in content creation workloads.
- DDR4-3200 modules are commodity components with broad availability, but verifying JEDEC compliance prevents potential stability issues. Non-standard voltage or latency specifications can trigger boot failures or force the BIOS into conservative downclocking, negating any performance gains from higher density modules.
- SO-DIMM form factor indicates a compact chassis design, which constrains aftermarket cooling solutions for memory modules. Low-profile heat spreaders remain mandatory; standard full-height components risk contact with CPU cooler or internal structure interference during installation.
- The 2-slot architecture provides no upgrade redundancy. Adding storage beyond 64 GB requires complete module replacement rather than incremental expansion, meaning the existing RAM must be removed and repurposed or discarded to achieve higher configurations.
- Memory speed negotiation occurs at boot; the system will downclock to the slowest module installed. Pairing existing RAM with new modules of differing latency ratings (such as CAS 16 with CAS 18) introduces latency penalties across all memory operations without proportional bandwidth gains.