MSI Gaming GE63 Raider RGB-1050 RAM upgrade specifications
MSI GE63 Raider RGB-1050 gaming laptop features DDR4-SDRAM memory upgrade specifications. The device contains two SO-DIMM slots supporting maximum RAM capacity of 64 GB. Compatible memory operates at 2666 MHz frequency. Upgrade options utilize SO-DIMM form factor modules, allowing expansion beyond factory-installed configuration. Specifications define supported memory standards for this gaming series model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 01 June 2020 |
Additional Notes
- Dual channel architecture requires matching memory modules to reach peak data transfer rates and prevent memory controller downclocking.
- The MSI GE63 Raider RGB-1050 internal motherboard layout necessitates the removal of the entire bottom chassis cover to access the memory banks.
- Upgrading beyond factory capacities requires low voltage 1.2V modules to maintain stability within the thermal design power limits of the laptop.
- Installation of memory modules with higher frequency ratings will result in automatic downclocking to the system bus limit of 2666 MHz.
- Thermal pads on the original RAM may need replacement or reapplication if the new modules have different physical chip densities.
- Reaching the 64 GB threshold requires 2 high density 32 GB sticks which may increase latent heat localized near the processor area.
- Full capacity utilization depends on the pre-existing BIOS version supporting high density memory modules.