MSI Gaming GE75 10SF-484 Raider RAM upgrade specifications
MSI GE75 10SF-484 Raider gaming laptop supports DDR4-SDRAM memory upgrades through 2x SO-DIMM slots. Maximum RAM capacity reaches 64 GB total, with compatible modules operating at 2666 MHz frequency. Upgrade specifications indicate SO-DIMM form factor compatibility. The GE series Raider model accommodates memory expansion for enhanced system performance and multitasking capabilities.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 23 July 2021 |
Additional Notes
- Dual channel mode functionality requires installing matching modules in both physical slots to double the available memory bandwidth.
- The absence of soldered memory on the MSI GE75 10SF-484 Raider motherboard ensures that the entire system memory remains replaceable in the event of a module failure.
- Installing modules with higher frequency ratings results in downclocking to the system limit of 2666 MHz due to chipset and processor architectural constraints.
- Occupying both slots with 32 GB modules is the only method to reach the maximum supported capacity as individual slots are capped at 32 GB each.
- The SO DIMM interface necessitates the use of unbuffered non ECC memory to maintain system stability and boot capability.
- Upgrading secondary storage at the same time as RAM is advisable because accessing the internal components requires removing the entire bottom chassis panel.
- Latency performance is determined by the module with the highest timing values if two disparate sticks are used together.