MSI Gaming GE75 8SE-062XFR Raider RAM upgrade specifications

MSI GE75 8SE-062XFR Raider MSI GE75 8SE-062XFR Raider MSI GE75 8SE-062XFR Raider MSI GE75 8SE-062XFR Raider MSI GE75 8SE-062XFR Raider

The MSI GE75 8SE-062XFR Raider Gaming series laptop features DDR4-SDRAM memory upgrade specifications with two SO-DIMM slots supporting a maximum RAM capacity of 32 GB. Compatible memory modules operate at 2666 MHz frequency. The upgrade slots accommodate standard SO-DIMM form factor components, enabling users to expand the system memory from its factory configuration to the maximum supported specifications of 32 GB total capacity.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency2666 MHz
Maximum RAM32 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2666 (PC4-21328)
Bandwidth21.3 GB/s
Laptop Release date16 May 2019

Additional Notes

  • Dual channel mode requires pairs of matching modules to maximize memory bandwidth and eliminate CPU bottlenecks during intensive gaming tasks.
  • The 32 GB threshold represents the motherboard firmware limit which prevents the use of 32 GB single sticks in the MSI GE75 8SE-062XFR Raider despite physical slot compatibility.
  • Installing modules with frequencies higher than 2666 MHz results in automatic downclocking because the memory controller is locked to the BIOS predefined speeds.
  • Upgrading memory requires the removal of the entire bottom chassis cover which typically involves penetrating a factory seal sticker and potentially impacting regional warranty coverage.
  • The absence of soldered memory on the PCB ensures that the entire system memory can be replaced if a module fails or if a total capacity increase is necessary.
  • Latency timings should be matched between the two SO-DIMM slots to prevent system instability or forced operation at the slowest common denominator.
  • Physical clearance within the tight internal casing restricts memory upgrades to standard height modules as heat spreaders might interfere with the bottom panel closure.