MSI Gaming GE76 12UHS-282IT Raider RAM upgrade specifications
MSI GE76 12UHS-282IT Raider gaming laptop features two SO-DIMM memory slots supporting DDR5-SDRAM modules at 4800 MHz frequency. Maximum RAM capacity reaches 64 GB for compatible DDR5 upgrades. The Gaming GE series specifications indicate current configurations allow expansion through dual slot architecture. Memory upgrade options conform to SO-DIMM form factor standards, enabling compatible DDR5 modules installation to enhance multitasking and performance capabilities within the stated maximum specifications.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR5-SDRAM |
| Frequency | 4800 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.1V |
| Number of pins | 262-pin |
| Interface | PC5 |
| PC Speed Rating | PC5-4800 (PC5-38400) |
| Bandwidth | 38.4 GB/s |
| Laptop Release date | 22 January 2022 |
Additional Notes
- The MSI GE76 12UHS-282IT Raider accepts only DDR5 modules, rendering all DDR4 inventory incompatible due to different notch positions and voltage requirements.
- The 64 GB ceiling translates to a maximum of 32 GB per slot when both SO-DIMM sockets are populated.
- DDR5-4800 represents the JEDEC baseline specification, meaning modules rated for higher frequencies will downclock to 4800 MHz unless XMP profiles are supported and enabled in BIOS.
- Single-channel operation occurs when only one SO-DIMM slot is occupied, cutting memory bandwidth in half compared to dual-channel configuration.
- DDR5 modules incorporate onboard voltage regulation, eliminating compatibility with voltage adjustment settings that existed in DDR4 platforms.
- SO-DIMM installation requires releasing side retention clips simultaneously while inserting at approximately 30 degrees before pressing down until clips auto-engage.
- Mixing modules with different densities across the two slots maintains functionality but may prevent dual-channel interleaving on some capacity ranges.
- Non-ECC unbuffered modules are required, as registered or ECC variants designed for server applications will not initialize in consumer laptop chipsets.
- The 4800 MHz specification indicates support for DDR5-4800 JEDEC profiles, though actual sustained bandwidth depends on CPU memory controller capabilities and thermal conditions.
- Upgrading beyond factory-installed capacity typically does not void warranty if installation causes no physical damage, though policies vary by region and require verification with the manufacturer.
- Dual-rank modules may provide marginal performance advantages over single-rank configurations in memory-intensive workloads despite identical capacity specifications.