MSI Gaming GF75 10UEK-038XPL Thin RAM upgrade specifications

MSI GF75 10UEK-038XPL Thin MSI GF75 10UEK-038XPL Thin MSI GF75 10UEK-038XPL Thin MSI GF75 10UEK-038XPL Thin MSI GF75 10UEK-038XPL Thin

MSI GF75 10UEK-038XPL Thin gaming laptop memory upgrade specifications include DDR4-SDRAM compatible modules in SO-DIMM form factor. The system features 2 memory slots supporting maximum capacity of 64 GB RAM. Compatible upgrade modules operate at 3200 MHz frequency. Specifications define memory compatibility and upgrade potential for this MSI Gaming GF series model.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency3200 MHz
Maximum RAM64 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-3200 (PC4-25600)
Bandwidth25.6 GB/s
Laptop Release date29 March 2021

Additional Notes

  • SO-DIMM memory architecture limits upgrade capacity to 64 GB total across 2 slots, requiring both slots to be populated with 32 GB modules to reach maximum configuration.
  • DDR4-3200 specification establishes a bandwidth ceiling of approximately 51.2 GB/s per channel; any aftermarket modules exceeding 3200 MHz will operate at the native 3200 MHz specification rather than rated speed due to BIOS controller limitations in the MSI GF75 10UEK-038XPL Thin.
  • SO-DIMM form factor constrains module selection exclusively to laptop-class memory; standard desktop DDR4 modules are physically incompatible and cannot be forced into the available slots without permanent damage.
  • Dual-channel configuration with 2 slots means asymmetrical population (single module installation) reduces effective bandwidth by 50 percent and disables dual-channel interleaving, resulting in measurable latency penalties during memory-intensive gaming workloads.
  • Warranty considerations apply only when using DDR4-SDRAM modules rated for 3200 MHz or lower; installation of overclocked memory modules (3600 MHz or higher) may trigger warranty exclusions if system instability occurs, even if modules operate at de-rated speeds.
  • Existing slot occupancy must be verified before purchase; replacing factory-installed memory requires removal of both original modules, creating a complete hardware compatibility reset rather than supplemental expansion.