MSI Gaming GF76 11UG-410XPL Katana RAM upgrade specifications

MSI GF76 11UG-410XPL Katana MSI GF76 11UG-410XPL Katana MSI GF76 11UG-410XPL Katana MSI GF76 11UG-410XPL Katana MSI GF76 11UG-410XPL Katana

MSI GF76 11UG-410XPL Katana gaming laptop supports DDR4-SDRAM memory upgrades with two SO-DIMM slots. Maximum RAM capacity reaches 64 GB total. Memory specifications include DDR4 modules operating at 3200 MHz frequency. Compatible upgrades utilize SO-DIMM form factor. Existing memory configuration can be expanded through available upgrade slots to reach maximum specifications supported by the GF76 Katana series platform.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency3200 MHz
Maximum RAM64 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-3200 (PC4-25600)
Bandwidth25.6 GB/s
Laptop Release date07 February 2022

Additional Notes

  • The MSI GF76 11UG-410XPL Katana accepts only SO-DIMM modules, making desktop DIMM memory physically incompatible regardless of other specifications.
  • DDR4-SDRAM requirement excludes DDR3, DDR3L, and DDR5 modules from use in this system.
  • The 3200 MHz native frequency allows installation of higher-rated modules, which will automatically downclock to match the system's maximum supported speed.
  • Installing lower-frequency RAM such as 2400 MHz or 2666 MHz modules forces the entire memory subsystem to operate at the slower speed, creating a performance bottleneck.
  • The dual-slot configuration enables single-channel operation with one module or dual-channel operation with matched pairs, where dual-channel provides approximately double the memory bandwidth.
  • Reaching the 64 GB ceiling requires 2 modules of 32 GB capacity each, as no higher-density SO-DIMM options exist for this memory type.
  • Mixing modules of different capacities, speeds, or latencies typically succeeds but forces all memory to run at the lowest common specifications, reducing overall performance.
  • Memory replacement on SO-DIMM systems generally preserves manufacturer warranty when performed without damaging the retention clips or socket housing.
  • Single-rank versus dual-rank module architecture affects maximum capacity support on some chipsets, though 32 GB dual-rank SO-DIMMs remain compatible within the stated 64 GB limit.
  • Non-standard voltages such as 1.35V low-power DDR4 variants function correctly as they remain within DDR4 specification tolerance.