MSI Gaming GF76 12UC-019XFR Katana RAM upgrade specifications
The MSI GF76 12UC-019XFR Katana gaming laptop supports DDR4-SDRAM memory upgrades through two SO-DIMM slots. Maximum RAM capacity reaches 64 GB total, with compatible modules operating at 3200 MHz frequency. The GF series Katana model accommodates standard SO-DIMM form factor memory modules for expansion and performance optimization. Specifications confirm compatibility with DDR4 technology across both available upgrade slots.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 31 December 2021 |
Additional Notes
- Dual channel architecture requires matching memory modules in both slots to provide maximum memory bandwidth for the processor.
- The 64 capacity limit necessitates the use of 32 density modules in each physical slot.
- Operating at 3200 requires JEDEC compliant modules to ensure the system boots at the rated speed without XMP profile support.
- Installation of memory requires the removal of the entire lower chassis cover which involves breaking a factory seal on specific regional variants.
- The MSI GF76 12UC-019XFR Katana utilizes a legacy memory standard that prevents the use of newer DDR5 hardware due to physical pin alignment and voltage differences.
- Thermal constraints within the slim chassis favor modules with low voltage requirements to minimize heat buildup near the specialized cooling pipes.
- Asymmetrical memory configurations will force the system into single channel mode and significantly reduce integrated graphics throughput.