MSI Gaming GL63 8SDK-1034XRU RAM upgrade specifications
The MSI GL63 8SDK-1034XRU Gaming series laptop features two SO-DIMM memory slots supporting DDR4-SDRAM at 2666 MHz frequency. Maximum RAM capacity reaches 32 GB total. The upgrade specifications indicate compatible memory modules must utilize the SO-DIMM form factor. Current memory configuration and available slot capacity determine upgrade feasibility for this MSI GL series model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 16 October 2019 |
Additional Notes
- The dual channel architecture implies that installing 2 identical memory modules is necessary to achieve the maximum theoretical memory bandwidth.
- The 32 GB maximum memory ceiling is determined by the internal memory controller limitations of the MSI GL63 8SDK-1034XRU hardware platform.
- Installing modules with frequencies higher than 2666 MHz results in automatic downclocking because the system firmware enforces a strict clock speed limit.
- Low voltage 1.2V DDR4 modules are required to ensure stability and prevent thermal throttling within the compact SO-DIMM housing.
- Latency timings are restricted by the BIOS defaults which prioritizes JEDEC standard profiles over aggressive XMP overclocking values.
- Physical access to the SO-DIMM slots requires the removal of the entire bottom chassis panel which can involve piercing a factory seal sticker in certain regions.
- Upgrading from a single module to a dual module configuration significantly reduces integrated graphics bottlenecks during high load tasks.
- The absence of soldered memory on the motherboard provides a non-destructive path for total memory replacement if a factory module fails.