MSI Gaming GL75 9SCK-010RU RAM upgrade specifications
The MSI GL75 9SCK-010RU Gaming series laptop supports DDR4-SDRAM memory upgrades configured with 2x SO-DIMM slots. Maximum compatible RAM capacity reaches 64 GB total, with memory operating at 2666 MHz frequency. The SO-DIMM form factor defines the physical specifications for compatible upgrade modules. RAM upgrade specifications for the GL75 9SCK-010RU model enable users to expand memory capacity beyond factory-installed configurations to meet performance requirements.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 17 October 2019 |
Additional Notes
- The MSI GL75 9SCK-010RU contains 2 memory slots operating in a dual-channel configuration, which means populated slots will deliver approximately double the memory bandwidth compared to single-channel operation at identical frequencies.
- DDR4-2666 MHz represents the native JEDEC standard for 9th-generation Intel platforms; memory modules rated above this frequency will operate at 2666 MHz unless BIOS overclocking profiles are manually enabled, reducing performance gains from premium-tier memory purchases.
- SO-DIMM form factor restricts upgrade options to laptop-specific modules; desktop DDR4 memory cannot physically fit or function in these slots despite using identical electrical specifications.
- A 64 GB maximum capacity ceiling indicates the memory controller and BIOS firmware support up to 32 GB per slot; upgrading beyond this threshold requires replacement rather than supplementation of existing modules.
- Dual-slot architecture prevents asymmetrical configurations; installing memory modules of different capacities will force both slots to operate at the speed and timing of the slowest module, potentially degrading performance if mixing specifications.
- The SO-DIMM slot design typically permits tool-free installation through spring-clip mechanisms, making memory upgrades accessible without disassembly of other components; however, battery removal may be required depending on BIOS access requirements.