MSI Gaming GL75 9SE-221XFR RAM upgrade specifications
The MSI GL75 9SE-221XFR gaming laptop features DDR4-SDRAM memory with two SO-DIMM slots for RAM upgrade compatibility. Specifications indicate maximum memory capacity of 64 GB, with DDR4 modules operating at 2666 MHz frequency. The SO-DIMM form factor provides upgrade options for users requiring enhanced performance. Compatible memory upgrades support the GL75 9SE-221XFR specifications and maximum RAM configurations.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 17 September 2019 |
Additional Notes
- The dual-slot configuration permits dual-channel memory architecture which doubles the available bandwidth for the processor compared to single-stick configurations.
- The MSI GL75 9SE-221XFR utilizes a non-soldered design that allows for the total replacement of factory modules to reach the maximum 64 GB threshold.
- Installing modules with frequencies higher than 2666 MHz results in an automatic downclocking to match the hardware-coded bus speed of the chipset.
- Achieving the maximum supported capacity requires 2 matching 32 GB dense modules as the motherboard cannot accommodate 4 sticks.
- Accessing the SO-DIMM slots involves the removal of the entire lower chassis panel which may involve piercing a factory seal sticker in certain regions.
- Mixing modules with different CAS latencies will force the system to operate at the timings of the slowest installed stick.
- The physical interface requires 260-pin small outline modules specifically designed for mobile chipsets rather than standard desktop DIMMs.