MSI Gaming GP76 10UE-070IT Leopard RAM upgrade specifications
The MSI GP76 10UE-070IT Leopard gaming laptop features two SO-DIMM memory slots supporting DDR4-SDRAM specifications at 3200 MHz frequency. Maximum RAM capacity reaches 64 GB for upgrade configurations. Compatible memory modules utilize the SO-DIMM form factor standard. The GP76 series supports DDR4 technology, enabling users to expand system memory by installing additional compatible RAM modules into available slots. Specifications allow for significant memory upgrades to enhance multitasking and performance capabilities on the MSI Gaming GP76 platform.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 01 February 2021 |
Additional Notes
- The dual slot configuration requires removing existing modules for capacity increases because no vacant slots remain for expansion.
- Hardware stability relies on matching the CAS latency and voltage of the original factory modules to ensure stable operation at the maximum rated frequency.
- System architecture necessitates the use of a matched pair of modules to enable dual channel memory bandwidth for optimal frame rates during gaming.
- Integration of the MSI GP76 10UE-070IT Leopard with 10th generation processors may result in memory downclocking if the internal controller does not natively support the 3200 MHz profile through JEDEC standards.
- Physical access to the SO-DIMM slots requires the removal of the entire bottom chassis cover which involves penetrating a factory seal sticker in certain regions.
- Upgrading to the 64 GB limit involves using two 32 GB high density modules which increases the thermal load within the compact SODIMM area.
- Bios limitations might restrict advanced XMP profiling forcing the memory to run at the default SPD speed regardless of the module rating.